VBe box

The sealing tests are produced by vacuum tests, or pressurization tests for blisters, bottles, pouches, jars or bottles.
They are achievable direct production line board.
They are made by the vacuum box and allows the operator to immediately view a leaking sample.

Vacuum chamber VBe

The vacuum box ACF-measurement are divided by size, consoles and options they offer.
The VBs are the simplest of our vacuum boxes. They are manual, all pneumatic control and without timer.
VBb offer a quick and simple test, while VBe allow for complex vacuum management cycles, controlled re-inflation, memory of "bubble points".
VBe have a ticket printer to get a direct report of the results.
With VBe, ACF-measurement is the only one that actually offers an ISO 8871-5 immersion test. The time to return to atmospheric pressure is controlled at 1sec/24h. The end of the cycle is not declared until the end of this time.

Main Features:

  • Transparent PMMA material.
  • Standard sizes: 350x300x100mm (WxHxD).:
    • 350x300x100, 150 or 200mm.
    • 250x150x120mm (small model).
  • All sizes possible.
  • Memory of "bubble points".
  • Mode Long-time (test without time limit).
  • Accuracy : ± 5mbars ou ± 2mbars according to conf.
  • Quick re-inflation.

The chambers or boxes

The tank

The tank is common to all our releases. It is separable from the control unit and the vacuum generator. It is waterproof, without drilling down, and extremely strong. Made of PMMA transparent it can be made to your specifications. Visibility is possible on the 6 faces.

The vacuum port

To prevent entry of liquid or pollution, the vacuum port is always carried by the cover. Main tank is pierced with no suction hole including the bottom, which is a source of problems during accidental aspiration of product or water with methylene blue.

The pressure tap

As the vacuum port, the pressure point is always carried by the cover, independently of the vacuum. The chosen solution allows for a fair pressure ±5mBars, one in the tank, and not the one given by the vacuum generator when the vacuum sensor is plugged on. Even for the vacuum, there are losses in the pipes.

Main Features:

  • Transparent PMMA material.
  • All sizes possible.
  • 4 non-slip feet.
  • The possible cover anti-fall
    (Office on large size)
  • Front door possible.
  • 3 types of pilot consoles.
Caissons de test etanchéité

Un Concept Modulaire

CSe console

With our modular concept, you can upgrade your equipment without changing the box or switch box and keep your console.
Control consoles are interchangeable between them. .
They also enable rapid troubleshooting in case of problems.

ACF-measurement offers three types of steering console:
The CSs "simplified console" is the simplest console - only air.
The CSb "console Basic" and the CSe "console Extended".
The CSb and CSe consoles have the vacuum pump option. Then they become CSb-p or CSe-p.
They thus respond to the IATA recommendation (see tab below).


  • Graphic TFT color display (89mmx35mm).
  • 16 instructions programmable.
  • 8 cycle of 8-step with 16 instructions.
  • memorization up to 20 "bubble points".
  • Accuracy : ± 5mbars ou ± 2mbars according to conf.
  • Respond to the ISO 8871-5.
  • Quick re-inflation.
  • Ticket printer.
  • Second Output RS232C.

Control Method IATA

Leaking control for air transport of hazardous liquid products

Products transported by air experience significant pressure differences at altitude that can increase the risk of leakage and cause an accident (explosion, fire, etc.) if you are in the case of a so-called dangerous product (labelled UN).
It is therefore necessary to ensure that they are no leak, in high conditions.

U.S. regulations (US DOT) and IATA (the International Air Transportation Association) require enhanced waterproofing tests for packaging containing hazardous liquids or risky products. The following products are affected by these leaking tests
  - Flammable liquids (Class 3) or Toxic (Division 6.1) of the packaging group III*.
  - Dangerous said air transport of products (labelled ONE).
  - All other liquids at risk.

Regulations require that products be tested and compliant from the moment of design..
The method will therefore be applied in Design and "First production and then in case of Change Control"

ACF-measurement offers optional consoles in IATA mode and thus responds to this recommendation as well as to the recommendations of major international cosmetics groups.
A vacuum pump is enslaved by the CSb-p or CSe-p console. The use is absolutely identical to the standard consoles.
Thanks to our modular concept, you can evolve your equipment without changing boxes and at a lower cost. We only intervene on the console.
For many months, we have even been adapting our consoles on boxes of all brands..

CSb-p and CSe-p consoles:

  • Depression up to -950 mBar.
  • Long-time possible (enslaved pump).
  • Quick re-inflation possible (option).
  • Maintenance-free vacuum pump.
QAC-MC-836 C


Complémentaries accessories

ACF-measurement offers accessories, baskets and pressing only 316L stainless steel passived. La strength of these guarantees extreme longevity of use. Many tricks developed by ACF-measurement make the job easier for users, such as; INOX basket with variable height cover.

Partitionings and layrings

ACF-measurement offers, as an option, interlocking partitioning and appropriate set-up to sample. Ask for the additional fact sheet or ask us for a study with your samples.

Exemple de caisson spécifique :

  • Dimensions: 550x450x250mm (LxlxP).
  • Test en immersion.
  • Support d'égouttage du panier.
  • Panier INOX 316L et couvercle panier ajustable en hauteur.
  • Cloisonnements PMMA.
  • Vanne de vidange.
  • Verins de maintien du couvercle (anti-retombée).
  • Regonflage rapide.
Caisson et Panier INOX